|
|
|
|
 |
|
|
|
|
|
|
Linear: Basic Air Cylinders
Basic linear air cylinders are used to provide straight-line, in/out linear movement for a variety of applications. Basic air cylinders are available as single-acting and double-acting with single or double rod and non-rotating models.
Body styles include crimped, round, or tie rod. Single-acting cylinders develop thrust in one direction and have lower air consumption compared with the equivalent size of double-acting cylinders. With a double-acting cylinder, air pressure may be alternately applied to provide force in both directions.
Series: NCM, NCJ2, NCG, NCA1, CJ, CM2, CG1, MB, CSI, C85, and C95.
|
|
|
Linear: Compact Air Cylinders A compact air cylinder functions in the same manner as a basic air cylinder with both single and double acting, single or double rod, and non-rotating models. However, SMC compact cylinders minimize space requirements by allowing for precise, direct mounting in the least amount of space possible.
Series: (N)CQ2, NCQ7, CQS, CU, and CUJ
|
|
|
|
Linear: Rodless Air Cylinders
Rodless air cylinders differ from basic air cylinders in that no piston rod extends outside the cylinder body. Instead, the internal piston is connected to an external carriage, by means of a magnetic or mechanical coupling system.
SMC rodless air cylinders are ideal for long stroke applications because they are unaffected by rod overhang, bending, piston binding, and uneven seal wear, and for use in confined areas where space is a premium.
Series: CY, REA, MY1, MY2, MY
|
|
|
|
|
|
|
|
Guided Air Cylinders Guided cylinders utilize guide rods mounted parallel to the piston rod to provide stable, non-rotating, high side load performance. SMC offers dual rod, slide table, heavy duty and precision models. Like rodless cylinders, SMC guide rod cylinders reduce rod bending, piston bending and uneven seal wear. Low profile models are available for restrictive space limitations.
Series: Dual Rod–CXS; Slide Table–MXU, MXQ, MXH, MXP, MXS, MXF, MXW; Heavy Duty–MGP, MGQ, MGG, MGC, MGF; Precision–MTS
|
|
|
|
|
|
|
Rotary Actuators SMC manufactures two of the most common types of rotary actuators: Rack and Pinion and Vane style. In addition, we offer Combination models combining compact cylinders and rotational capability and rotary gripper combinations. When the application calls for rotational motion less than one revolution, rotary actuators can mount right at the equipment joint without taking up space with long stroke lengths, which would be required to do the same job with a linear cylinder. SMC's rotary actuators can achieve arc lengths of 90°, 180°, 190°, or even 270°, depending on the configuration.
Series: Vane Type–MSUB, (N)CRB1 CRB1BW; Rack and Pinion–MSQ, (N)CRQ, (N)CRA1; Combination–MK2, MRQ, MHRQ
|
|
|
|
|
 |
Grippers SMC offers one of the most extensive lines of pneumatic grippers in the industry today. The series include rotary driven, two, three and four finger parallel styles that are ideal for gripping and centering; a wide opening parallel model, designed to accommodate many different sized parts; a heavy duty style, suitable for a wide range of applications; an angular model, speed adjustment built in; a toggle to give reliable gripping support; a low-contamination style, equipped with a protective boot; and electric models.
Series: MHZ, MHK, MHL, MHR, MHS, MHQ, MHF, MHC, MHY, MHW, MHT, MHRQ, MVC
|
|
|
|
|
|
|
Accessories SMC also offers a large selection of accessory products, to further compliment our abundant line of cylinders and actuators. To attach actuators we offer rod clevises, mounting brackets and alignment couplers, feedback is provided by the largest selection of auto switches available from any cylinder manufacturer. To control speed we offer shock absorbers, quick exhausts and flow controls in a wide variety of sizes and configurations.
Series: (N)RB, (N)J, (N)AS, (N)AQ
|
|
|
|
|
|
|
Ace safety shock absorbers are designed for emergency stop situations on industrial and warehouse crane systems. They provide an economical alternative to industrial shock absorbers for these types of application
Applications:
- · Overhead cranes
- · Conveyors and turntables
- · Stacker and high bay warehouse cranes
- · Dockside equipment and bridges
|
|
|
|
|
|
|
Gas Springs control the lifting and lowering of lids, flaps, hoods and safety guards etc.
Features:
- · Reduce manual effort and forces
- · High force capability in a small package
- · Controlled extension and compression speeds
- · Provides fingertip control
- · Increases safety
- · Adjustable or fixed force
|
 |
|
 |
|
|
Feed Controllers: These devices provide precise velocity control for critical feed rate applications in the wood, plastic, metal and glass industries
Features:
- · Constant precise feed control
- · Infinitely adjustable
- · Controlling lifting and lowering
- · Stroke lengths up to 800 mm
- · Double acting or single acting models
- · Control forces up to 50,000 N
|
|
|
|
|
|
|
|
|
|
|
Pneumatic Actuators
Jomar offers Double Acting and Spring Return pneumatic actuators with torque ranges from 42 in/lb to 485,908 in/lbs. Actuator bodies are hard anodized extruded aluminum for severe applications.
|
|
|
Direct Mount Butterfly Valves
The series 600 lug-style and series 900 wafer-style butterfly valves are standard with epoxy coated ductile iron body, stainless steel disc and stem, EDPM or PTFE cartridge style seats. Available with ISO 5211 mounting pad for direct mounting from stock 2” through 12”.
|
|
|
|
Electric Actuators
The Jomar SM-200 mechanical limit switch comes standard with 2-SPDT mechanical switches (4-SPDT mechanical switches optional). Proximity switches are also available.
|
|
|
|
